Lattice Truss Welding Machine

• Customization: Available
• After-sales Service: 24 Hours Remote Service Available
• Girder Height: 70-350mm
• Model NO.: XHJ-350
• Section Length: 190-210mm
• Transport Package: Standard Export Packing
• Specification: XHJ-350
• Trademark: XINZHOU
• Origin: Ningbo China
• Production Capacity: 10 Sets/Month

Product Description

XHJ-350 Fully Automatic Lattice Girder Welding Machine
 

The equipment is sepcially designed and researched on the basis of enhancing steel bar truss girder welding machine stability, reducing the energy consumption and noise, reducing size. It is applied in the construction machinery industry.

Main contents of research and development:
1. high pressure high flow hydraulic system to meet the production requirements.
2. clamping structure to clamp five steel bars at the same time.
3. movable structure to adjust the push distance conveniently.
4. improved straightening mechanism to reduce noise and large energy consumption from existing equipment, by pulling steel bar through a set of straightening roller to straighten the steel bar with energy saving and less noise, reduce the structure size and feeding stable.
5. hydraulic system to replace five straighten electric motors, one servo motor and one air compressor, to reduce the energy consumption and noise and more stable during the production.

Features:
1. Steel truss welder is a professional automatic machine using steel plate materials (Cold rolled steel/Hot rolled steel) to produce triangular trusses (including roof steel trusses and railway steel trusses). It is good in common use, and easy to make adjustment. It consists of 6 parts, 1.Put rack, 2.Straightening mechanism, 3.Main framework, 4.Discharging rack, 5.Hydraulic system, 6. Electrical system.
2. Truss stepping mechanism is controlled by CNC servo motor. It is high precision and easy to make adjustment.
3. Integral put rack could carry 3 tons of steel plate materials. It is proper designed and small land occupancy area (Patented).
4. Wire bending mechanism, high precision in forming, steady and easy to use (Patented).
5. The control interface of humanization is easy to operate, visually, high intelligent.
6. Electronic components are all imported fromSiemensand Mitsubishi. They are steady and reliable.
7. The silicon control triggering unit is low power consumption, small and high reliability.
8. Automatic collecting mechanism reduces labor intensity and improves efficiency.
9. Intelligent fault identification and alarm system is easy to make maintenance.
10. Automatic steel truss anchor bending forming mechanism could make bending in high precision (Patented).
11. Perfect production and management system is easy for operation and for production.
12. Automatic fixed length cutting mechanism is high speed, high precise, and high quality (Patented).
13. Control system supplied by Siemens, Mitsubishi and Panasonic.

Main Technical Parameters:
Rated Frequency: 3*250KW
Power Supply: 380V 50Hz
The Power Phase Number: three-phase four-wire
Duty Cycle: 20%
Air Pressure: 0.6-0.8MPa
Coolant Flow: 120L/min
Coolant Temperature: ≤30ºC
Dimension: 31m*4.4m*2.4m
Oil Pressure: 5-12MPa
Wave Crest Interval: 190-210 adjustable (No manual cutting is required)
Truss Height: 70-350mm adjustable
Base Angle: 65-100mm adjustable
Wave Wire Diameter: Φ4-8mm
Main Wire Diameter: Φ8-16mm
Maximum Welding Capacity: 12m/min
Diameter of Lower Wire: Φ6-16mm