| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Remote Service Available |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The equipment is specially designed and researched on the basis of enhancing steel bar truss girder welding machine stability, reducing the energy consumption and noise, reducing size. It is applied in the construction machinery industry.
Components of the machine:
1. 5 coil wire feeding racks
2. wire feeding and straightening system
3. main bending. welding and cutting frame
4. girder loading holder
Features:
- Hydraulic system is used to match the production
- 5 clampper s used to holed five wires at same time
- adjustable structure is used to adjust final product size
- special stragighten mechanism is used to reduce the noise, energy lost and structrue change. Special rollers applied to reduce the friction during the feeding process
- Hydraulic system used to replace five straighten electric motors, one servo motor and one air compressor, to reduce the energy consumption and noise and more stable during the production.
Main Parameters:
Rated Power: 3 x 250KVA
Power supply: 380V 50Hz
Number of power phases: Three phase four cable
Duration rate: 20%
Air source pressure: 0.6-0.8MPa
Coolant temperature: ≤30°C
Dimension: 39.4m x 4.4m x 3.3m
Oil pressure: 7-11MPa
Truss height: Straight: 70-350mm Bend: 70-320mm
Wave crest interval: 190-210mm adjustable
Wave wire diameter: φ4-8mm
Main wire diameter: φ8-16mm
Maximum welding capacity: 12m/min
Diameter of lower wire: φ6-16mm
){kind=link}