Wire Mesh Welding Machine (fence mesh)

• After-sales Service: 24 Hours Remote Service Available
• Transport Package: Standard Export Packinf
• Specification: GWC-C
• Trademark: XINZHOU
• Origin: Ningbo China
• Production Capacity: 10 Sets/Month

Product Description

GWC-C Full Automatic Steel Bar Mesh Welding Production Line
 

Xinzhou GWC-C series mesh welding machine is created by our technical specialists with independent research and technology researches. The special wire feeding system has been implemented to ensure the smooth material feeding. The automatic two side unloading system are available to save the space between each mesh. For our C series mesh machine, the coiling material can be directly used for the main wire without bar straightener and cutting machine. 
 
This GWC-3200-C welding machine is capable to weld steel bar/wire with diameter from 6mm to 12mm. The interval for main bar is stepless adjustable by every 1mm and the interval for weft bar is adjustable by every 50mm. The max. welding capacity is 12mm +12mm.The max. mesh width is 3200mm. The welding speed is about 60-90 rows/min.
 
Delta, Mitsubishi and Siemens servo motor control and PLC with touch screen have been implemented to ensure the smooth and accurate working process and to make human-machine interfere much easier. This machine satisfied the Chinese ISO90001 standard and EU safety certification standards.

Main Technical Parameters:

Power Supply	380V 50Hz
Number of Power Phases	Three phase four cable
Duty Cycle	20%
Air Pressure	0.6-0.8MPa
Coolant Flow	40-80L/min
Coolant Temperature	≤30ºC
Maximum Welding Capacity	Φ12mm+Φ12mm
Interval of Longitudinal Bars	50mm (increase by every 50mm)
Interval of Furring Strips	≥50mm stepless adjustable
Diameter of Steel Bar	Φ6-12mm
Feeding Mode	Main bar: coil; Cross bar; pre-cut
Unloading Mode	Unloaded by unloading machine
Maximum welding velocity	50-90 rows/min